AUTOMATIC DE-FROST ELEMENT + STATS

WATER TANK DE-FROST ELEMENT Designed to reduce the chance of stored water freezing up by warming the water sufficiently to prevent freezing up of tank. The stainless element is simply installed by nutting through side wall of tank 55mm (2 1/8″) up from base, preferably near pump outlet. Without additional insulation the element alone should prevent 45 litres of water freezing at temperatures down to -15C. Larger capacities may need additional insulation of tank to protect to this level (Tank wrap BXTX12 or Styrofoam). To save battery power consumption, use tank insulation wrap to reduce heat loss from tank walls. This will make the element’s job easier and will therefore be on for reduced times saving a lot of power, while providing much better protection. We recommend illuminated on / off switches (MC12N/G) are installed with both elements to confirm power is off as their work is not visible. Both elements are powered by 12 volts DC supply at 30 watts and consume 2.5 amps. Suitable for plastic and metal tanks but not fuel tanks. DFE-02 has inbuilt automatic thermostats, turning it on at approx 5C and off at 10C. Stainless element size: DFE-02 200 mm long x 18 mm dia.  Use CBE MC12N/G switch.